Used Solar Panel High Temperature Heating Disposal Pyrolysis Furnace Kiln Oven
description1
01
product introduction
Solar panel heating disposal furnace can adopt electric heating methods to split unframed solar panels by high temperature for the subsequent sorting. The furnace is equipped with waste gas purification system, and precise temperature control system.
Product Parameters of Solar Panel High Temperature Heating Disposal Furnace
| 1 | Item | Specifications |
| 2 | Voltage | 220V/380V 50H |
| 3 | Loading Material | 10-25KG/min Loading Height：≤20mm±2mm |
| 4 | Loading Area | L3000mm |
| 5 | Heating & Cooling Area Dimension | 21000×1500×250mm（L×W×H） |
| 6 | Unloading Area | 5200mm |
| 7 | Loading Area Height | 900mm |
| 8 | Overall Dimension of Furnace | 29200×2550×1950mm（L×W×H） |
| 9 | Overall Length | 29200mm |
| 10 | All Power Capacity | 460KW |
| 11 | Exhaust Gas Motor | 4-72-4A power capacity 1.1kw |
| 12 | Preheating Area | Normal-500℃ |
| 13 | Calcination Area | max800℃ |
| 14 | Designed Temp. | max800℃ |
| 15 | Temperature Uinform | ±5℃ |
| 16 | Temperature Toralence | ±3℃ |
| 17 | Heating Power Capacity | 450KW |
| 18 | Multiple Sub-furnaces | No.1 sub-furnace, total 3 heating areas, total 210KW No.2 sub-furnace, total 5 heating areas, total 240KW No.3 sub-furnace, cooling system |
| 19 | Conveyor drive | 4.0KW variable frequency |
| 20 | Oxygen Supplement | 2.5-25Cubic Meters/H |
| 21 | Conveyor Mesh Belt | SUS310S 1500mm Width |
| 22 | Loading of Conveyor Mesh Belt | 10KG/㎡ |
| 23 | Conveyor driving speed | 500-2500mm/min |
| 24 | Overall Weight | 35T |
Installation&Service
Equipment Installation, Commissioning, Training
1. After the equipment arrives at buyer’s factory, we would send professional personnel to customer factory within 14 days after receiving customer's notice to install and commission the equipment. Customers should prepare all cranes and forklifts for installation.
2. After the equipment is installed, We would explain and train the performance, function, operation, repair, maintenance, etc. of the equipment to relevant personnel.
The main contents of the training are as follows:
The basic structure and working principle of the equipment;
Training on the use and operation of the equipment and the function of the control system;
e-catalogue
drawing
